| NO. | Name | Unit | Parameters |
|---|
| 1 | Max. drilling diameter | mm | Æ1300 |
| 2 | Max. drilling depth | m | 38(4-section of friction)
(standard)
48(5-section of friction) (optional)
38(4-section of mechanical interlock ) (optional) |
| 3 | Safe operation range(from rotarying centre) | mm | 3150～3550 |
| 4 | Dimension in working condition(L×W×H) | mm | 7122×4200×17250 |
| 5 | Dimension in transportation condition(L×W×H) | mm | 12300×3200×3060 |
| 6 | Overall drilling weight(drilling tools not included) | t | 45.5 |
| 7 | Engine | Engine model | | CUMMINS B5.9-C |
| Engine rated power/rotary speed | kW | 133 /2000r/min |
| Max. Torque of engine | N.m | 553 /1500r/min |
| 8 | Hydrulic system | Max. pressure | Mpa | 32 |
| 9 | Rotary drive | Max.output torque | kN.m | 150 |
| Rotary speedRotary speed | rpm | 6～28 |
| 10 | Pull-Down clinder | Max. pull-down piston push | kN | 120 |
| Max. pull-down piston pull | kN | 160 |
| Max. pull-down piston stroke | mm | 3500 |
| 11 | Main winch | Max. pulling force | kN | 145 |
| Max. wire speed | m/min | 75 |
| Wire diameter | mm | 26 |
| 12 | Auxiliary winch | Max. pulling force | kN | 50 |
| Max. wire speed | m/min | 70 |
| Wire diameter | mm | 16 |
| 13 | Mast | Left/ right Side | ° | 3/3 |
| Forwards | ° | 5 |
| 14 | Slewing bearing | Slewing bearing angle | ° | 360 |
| 15 | Runing | Max. complete device running speed | km/h | 3.2 |
| Max. complete device grade ability | % | 40 |
| 16 | Track | Track width | mm | 800 |
| Outside width(min-max) | mm | 3200～4200 |
| Distance between two wheels longitudinally | mm | 3843 |
| Average grouning specific pressure | KPa | 70.5 |
